Fanimation FLORID LP8300 Serie Manual Del Usuario página 8

How to Assemble Your Ceiling Fan Blades (Continued)
6. Re-assemble the upper housing cover and motor
coupler washer as shown. (Figure 6)
7. Securely tighten the six screws that were previously
removed in Step 3 on the motor assembly. (Figure 7)
How to Assemble Your Ceiling Fan
1. Remove the hanger ball portion from the downrod/
hanger ball assembly by loosening the set screw in
the hanger ball until the ball falls freely down the
downrod. Remove the pin from the downrod, then
remove the hanger ball. Retain the pin and hanger
ball for reinstallation in Step 6. (Figure 1)
2. Remove the hairpin clip and clevis pin from the
bottom of the downrod. Retain the pin and clip for
reinstallation in Step 4. (Figure 2)
Upper Housing
Cover
Downrod
Set Screw
Hairpin
Clip
8
Motor Coupler
Washer
Motor
Assembly
Figure 6
Motor
Assembly
Figure 7
Pin
Hanger Ball
Figure 1
Clevis Pin
Figure 2