Silverline 265897 Manual De Instrucciones página 10

EN
Troubleshooting
Problem
Tool will not start
Slow rotation speed
Slow rotation speed or no rotation plus
possible visible sparking from Motor Vents
(5)
Vibration or abnormal noise
10
265897_OwnersManual.indd 10 265897_OwnersManual.indd 10
Possible Cause
Blown fuse
Power Cord (12) damaged
ON/OFF Trigger Switch (9) faulty
Faulty motor
Tool is overheating
Carbon brushes worn
Gearbox low on grease
Solution
Check and replace fuse. If problem persists
immediately contact an authorised Silverline
service centre
Contact an authorised Silverline service
centre
Switch the tool OFF and allow it to cool down
to room temperature. Inspect and clean the
ventilation slots
Contact an authorised service centre to have
the carbon brushes replaced
Contact an authorised Silverline service
centre
01/11/2022 15:07 01/11/2022 15:07