Selecline XJ-9K111A6 Manual De Utilización página 11

6.2 CLEANING
■ Clean the deep fryer after each use.
■ Never use solvents, chemical or abrasive cleaning agents, wire
brushes, sharp objects or scouring pads to clean the appliance.
■ To discard the oil, carefully lift the base unit (9) and pour the
cold oil into a disposable bottle with the help of a funnel. Wipe
off any remaining oil in the oil tank with kitchen paper. Dispose
of the oil in an environmentally safe way. Never pour the oil
into drains. Contact your local recycling centre for advice on
the disposal of the oil.
■ Base unit (9) and oil tank (4) – Wipe with a soft cloth lightly
moistened with water or warm soapy water. Dry thoroughly.
The oil tank is permanent and not removable.
■ Frying basket (10), lid (1), filter and cover – After removing
them, clean in warm soapy water. Rinse and dry thoroughly
before re-assembling to the base unit.
■ Fully assemble the appliance before using or storing. Store
the frying basket inside the appliance and press the Handle
release button (12) to fold down the handle.
7/ STORAGE
Store unplugged in a dry and well-ventilated place, out of the reach of children.
8/ WARRANTY AND LIMITATION OF LIABILITY
This product is guaranteed for a period of 12 to 24 months (as defined by local
legislation, with the period as per the till receipt) from the date of purchase, against
any fault resulting from a defect in materials or manufacturing.
This warranty does not cover damages caused by improper use or normal wear and
tear of the product.
Specifically, the warranty does not cover:
- Damage or problems caused by improper use, an accident, an alteration or power
supply of unsuitable current or voltage.
- Modified products, or those whose warranty seal or serial number is damaged,
altered, removed or oxidised.
- Replaceable batteries and accessories are guaranteed for a 6-month period.
- Battery failure, caused by excessively lengthy charging or by the failure to observe
the safety precautions explained in the manual.
- Visual damage, including scratches, dents or any other elements.
- Damage caused by any intervention conducted by a non-accredited person.
- Defects caused by normal wear and tear or due to normal ageing of the product.
- Software updates, due to a change in network settings.
- Product failures due to the use of third-party software to modify, change or adapt
11