ALFRA ROTABEST RB 35 SP Manual De Instrucciones página 15

dEScRiPTiOn
The magnetic core drilling machine can be attached to ferromagnetic work pieces using the installed
mechanically switchable permanent magnet. For this purpose, the magnetic lever must be pressed down-
wards and the safety tab must latch into place correctly. The motor can be switched on and off using the
large keys on the operator panel. The machine is equipped with two LEDs: The magnet sensor LED on the
housing indicates the operating state of the motor and the magnet's holding force. The motor LED on the
operating panel is used to control the temperature of the motor and the state of the carbon brushes.
A self-adjusting dovetail guide which the motor is attached to can be vertically adjusted using the star
handle. The type plate and an attachment possibility for the Allen keys included can be found on the back
of the machine.
A) Drive motor
B) Weldon quick-change tool holder
C) Slide and setting screws for adjustment on the back
D) Magnetic base
E) Recess for safety belt
F) Mains cable
G) Safety tab
H) Operating panel
I) Lever for magnet
J) Star handle
1. Motor ON
2. LED for motor control
3. Motor OFF
4. Magnetic lever ON
5. LED for magnetic field sensor
6. Magnetic lever OFF
15