SICK RAY26 Instrucciones De Operación página 42

18
MOUNTING
18 Mounting
42 O P E R A T I N G I N S T R U C T I O N S | RAY26
Mount the sensor and the reflector using suitable mounting brackets (see the SICK
range of accessories). Align the sensor and reflector with each other.
Note the sensor's maximum permissible tightening torque of 0.65Nm.
NOTE
RAY26P-XXXXX1 (MDO ≥ 1 MM), RAY26P-XXXXX3 (MDO ≥ 3 MM):
Recommended position of installation: between conveyor belts or conveyor rollers
8022178.1COX /2021-11-04 | SICK
Subject to change without notice