Worx WX477 Manual De Instrucciones página 12

Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration and noise accessories.
Plan your work schedule to spread any high
vibration tool use across a number of days.
ACCESSORIES
Hex key
Metal cutting
blade
Wood cutting
blade
Aluminum
cutting blade
Parallel guide
12
Vacuum
adaptor
We recommend that you purchase your
accessories from the same store that sold you the
tool. Refer to the accessory packaging for further
details. Store personnel can assist you and offer
advice.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for sawing wood, plastic,
metal and building materials while resting firmly
on the workpiece. It is suitable for straight and
curved cuts with mitre angles to 45°. The saw blade
recommendations are to be observed.
Jigsaw
WX477 WX478
WX477.1 WX478.1
1 1
1 1
1 1
1 1
/ 1
/ 1
ASSEMBLY AND OPERATION
Blade Installation
Blade Removing
Variable Speed Control (Only
for WX478 WX478.1 WX479)
Pendulum Function
ON/OFF Switch
Lock-On Button
WX479
Straight Cut and Curve Cut
1
Bevel Cut
Plunge Cut
1
Parallel Guide (Only for WX478
WX478.1 WX479)
1
Blade Storage (Only for WX478
WX478.1 WX479)
1
Vacuum Adaptor (Only for
1
WX478 WX478.1 WX479)
1
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls
free of dust. Occasionally you may see sparks
through the ventilation slots. This is normal and will
not damage your power tool.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
Action
See Fig. A1
See Fig. A2
See Fig. B
See Fig. C
See Fig. D
See Fig. D
See Fig. E1,E2
See Fig. F,G
See Fig. H
See Fig. I1,I2
See Fig. J
See Fig. K
Figure
EN