Descargar Imprimir esta página

Vestfrost MF 114 Instrucciones Para El Uso página 9

Ocultar thumbs Ver también para MF 114:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 26
Cool down of the appli-
ance
-15
C
Before the appliance is loaded with vac-
cines ensure that the temperature is below
-15 °C:
● Check the temperature on the thermo-
meter
● The temperature in the vaccine compart-
ment must always be monitored on the
thermo meter and be within the range
-15 °C to -25°C.
Due to the mechanical tolerance of the
thermostats you should always control the
temperatu re during cool down.
Loading the appliance
Loading vaccines
When the temperature in the freezer has
stabilized, i.e. the temperature should be
below -15 to -25°C and the compressor
stops and starts, vaccines can be loaded.
The vaccines should be placed in the mid
part.
fig. 8
Loading and freezing of
icepacks
The icepacks should be placed in the
icepack compartment and the suspended
tray. Make sure you have a good contact
between the icepack and the evaporater
surface. Fig.9
If thermostat is set to a warmer position,
remember to check the temperature in
the vaccine compartment
9
GB
fig. 9

Publicidad

loading

Este manual también es adecuado para:

Mf 214Mf 314