Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Delay
Set the Delay function:
1. Select a programme
2.Press the Delay button to choose the time(the delaying time is 0-24 H.)
Start/Pause
3.Press [
On/Off
Cancel the Delay function:
Press the [Delay] button until the display be 0H.It should be pressed before
starting the programme. If the programme already started, should press the
[On/Off] button to reset the programme.
Caution!
•
If there is any break in the power supply while the machine is operating, a
special memory stores the selected programme and when the power is
restarted, press the
Pre Wash
Pre Wash
The Prewash function can get an extra wash before main wash.
Extra Rinse
Extra
Rinse
The laundry will undergo extra rinse once after you select it.
Speed
Speed
Press the button to change the spin speed.
Temp.
When needed, the washing temperature can be adjusted by pressing the temperature
button in the following steps: Cold - 20°C - 30°C - 40°C - 60°C - 90°C.
My Cycle
Memory the frequently used programmes
Press [
cotton.
] to commence the delay operation
Choose the Programme
button the program will continues.
[
]
On/Off
]3sec. to memory the running programme. The default is
Delay
Setting time
24
Start
V.2
Publicidad
