JVC KD-A315 Manual De Instrucciones página 14

Setting menu
(
AUTO CNNCT (connect)
When the unit is turned on, the connection is
established automatically with...
OFF: No Bluetooth device.
LAST: The last connected Bluetooth device.
ORDER: The available registered Bluetooth
device found at first.
AUTO ANSWER
Only for the device being connected for
"BT PHONE."
ON: The unit answers the incoming calls
automatically.
OFF: The unit does not answer the calls
automatically. Answer the calls
manually.
REJECT: The unit rejects all incoming calls.
MSG INFO (message info)
Only for the device being connected for
"BT-PHONE."
AUTOMATIC: The unit informs you of the
arrival of a message by ringing
and displaying "RCV MESSAGE"
(receiving message).
• The display illuminate in blue.
MANUAL: The unit does not inform you of
the arrival of a message.
MIC SETTING (microphone setting)
Only for the device being connected for
"BT-PHONE." Adjust microphone volume
connected to the Bluetooth adapter,
[LEVEL 01/02/03].
VERSION
The Bluetooth software and hardware versions
are shown.
14 ENGLISH
: Initial)
(<RING COLOR>, 22)
Warning messages
ERROR CNNCT (Error Connection)
The device is registered but the connection
has failed. Use "CONNECT" to connect the
device again. ( 11)
ERROR
Try the operation again. If "ERROR" appears
again, check if the device supports the
function you have tried.
UNFOUND
No available Bluetooth device is detected
by "SEARCH."
LOADING *
The unit is updating the phone book.
PLEASE WAIT
The unit is preparing to use the Bluetooth
function. If the message does not disappear,
turn off and turn on the unit, then connect
the device again (or reset the unit).
RESET 8
Check the connection between the adapter
and this unit.
* Displays only when your mobile phone
is equipped with these functions and is
compatible with this unit.
Bluetooth Information:
If you wish to receive more information
about Bluetooth, visit the following JVC web
site: <http://www.jvc.co.jp/english/car/>
(English website only)