Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
-
Brush and comb your hair before using the curling iron.
-
Simultaneously press the mode change and temperature/
time/turns adjustment buttons for a few seconds to switch on the
device.
-
The heating tube will then heat up quickly.
-
Do not leave the product unsupervised while it is switched on.
-
Select the temperature between 160 and 200 °C on the display
by pressing the temperature/time/turns adjustment button,
based on the thickness of your hair.
-
Generally, the finer the hair, the lower the temperature should be
set and vice-versa. It is suggested to use 160 ºC for fine hair; 180 ºC
for normal hair; and 200 ºC for thick hair. Once the temperature
has been selected, wait a few seconds until it reaches the selected
temperature and it stops blinking.
64
SURFCARE 750 TRAVEL MAGIC WAVES
-
Press the mode change button until the word TIME starts
flashing, then press the temperature/time/turns adjustment
button to set the curling time, you can choose from 3 to 15 seconds.
Wait a few seconds until the word TIME on the display is fixed.
-
Press the mode change button until the word TURNS starts
flashing, then press the temperature/time/turns adjustment
button to set the number of turns of the curling cylinder, you
can choose from 3 to 12 turns. Wait a few seconds until the word
TURNS on the display is fixed.
-
To use the device, introduce a 1-3 cm hair section in the
opening.
-
Press the rotation button to the right when curling the right
side of your hair, and vice-versa.
Publicidad
