HOLZMANN MASCHINEN STM26 Instrucciones De Servicio página 27

SAFETY
This section contains information and important notes on the safe commissioning and handling of
the machine.
For your safety, read this manual carefully before commissioning. This will enable you
to handle the machine safely and thus prevent misunderstandings as well as
personal injury and damage to property. Pay special attention to the symbols and
pictograms used on the machine as well as the safety information and danger
warnings!
12.1 Intended use of the machine
The machine is designed exclusively for the following activities:
Machining (drilling, mortising) from wood, wood composites or materials with similar physical
properties to wood, within the prescribed technical limits.
HOLZMANN MASCHINEN GmbH assumes no responsibility or warranty for any other
use or use beyond this and for any resulting damage to property or injury.
Technical restrictions
The machine is designed for the work under the following conditions:
Relative humidity
Temperature (operation)
Temperature (storage, transport)
Prohibited applications / Dangerous misuse
Operating the machine outdoors.
•
Operating the machine without adequate physical and mental fitness.
•
Operating the machine without knowledge of the manual.
•
Modifying the machine design.
•
Operating the machine outside the technical limits specified in this manual.
•
Removing of the safety markings attached to the machine.
•
Modifying, circumventing or disabling the safety devices of the machine.
•
The non-intended use or the disregard of the explanations and instructions described in this
manual will result in the expiration of all warranty claims and compensation claims for damages
against HOLZMANN MASCHINEN GmbH.
12.2 User requirements
The machine is designed to be operated by one person. The prerequisites for operating the
machine are physical and mental fitness as well as knowledge and understanding of the operating
instructions. Persons who, due to their physical, sensory or mental capabilities, inexperience or lack
of knowledge, are unable to operate the machine safely must not use the machine without
supervision or instruction by a responsible person.
Basic knowledge of woodworking especially the correlation of wood type, mortise drill and speeds.
Please note that locally applicable laws and regulations determine the minimum age of the operator
and may restrict the use of this machine!
HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
NOTE
max. 70 %
+10 °C to +40 °C
-25 °C to +55 °C
SAFETY
27
STM26 | STM26S