Publicidad
Idiomas disponibles
Idiomas disponibles
Work on electrical components or equipment may only be carried out by a qualified electrician or
under the guidance and supervision of a qualified electrician.
Put on your personal protective equipment before working on the machine.
12.3
Safety devices
The machine is equipped with the following safety devices:
12.4
General safety instructions
To avoid malfunctions, damage and health impairments when working with the machine, the
following points must be observed in addition to the general rules for safe working:
•
Check the machine for completeness and function before starting. Only use the machine if
the separating and other non-separating protective devices required for machining have
are fitted.
•
Make sure that the guards are in good working order and properly maintained.
Select a level, vibration-free surface as the installation area.
•
Ensure sufficient space around the machine.
•
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects.
•
Ensure a clean working environment.
Keep the area around the machine free of obstacles (e.g. dust, chips, cut-off workpiece
•
parts, etc.).
Only use tools that are in perfect condition and free of cracks and other defects (e.g.
•
deformations).
Remove tool keys and other setting tools before switching on the machine.
•
•
Check the machine's connections for strength before each use.
Never leave the running machine unattended. Switch off the machine before leaving the
•
working area and secure it against unintentional or unauthorized restarting.
The machine may only be operated, maintained or repaired by persons who are familiar
•
and who have been informed about the dangers arising from this work.
Ensure that unauthorized persons keep a safety distance from the machine and keep
•
children away from the machine.
Always work with care and the necessary caution and never use excessive force.
•
•
Do not overload the machine.
Hide long hair under hair protection.
•
Wear close fitting protective work clothing and suitable protective equipment (eye
•
protection, dust mask, ear protection, safety-shoes, work gloves only when handling tools).
Never wear loose jewellery, loose clothing or accessories (e.g. tie, scarf).
•
•
Do not work on the machine if you are tired, not concentrated or under the influence of
medication, alcohol or drugs!
HOLZMANN Maschinen GmbH
www.holzmann-maschinen.at
Drill chuck cover (1)
Workpiece downholders (2), workpiece clamping (3)
and stops (4)
SAFETY
28
STM26 | STM26S
Publicidad
