HOLZMANN MASCHINEN STM26 Instrucciones De Servicio página 32

HOLZMANN Maschinen GmbH www.holzmann-maschinen.at
1. Assemble the machine feet:
Fix the 4 machine feet with washers (2),
circlip (3) and nut (4) in the mounting holes
2. Assemble the machine on the machine
stand:
Lift the machine onto the machine stand.
Align the mounting holes and fix the
machine with screws (1) washers (2), circlips
(3) and nuts.
3. Assemble the handweel handles:
Screw the handwheel handles (1) into the
threads of the handwheels.
4. Assemble the operating lever:
Insert the operating lever (1) into the
bracket (2) and fix it with washers (3), spring
(4) and nut (5).
5. Assemble the workpiece stop:
Fix the workpiece stop (1) to the left or right
end of the worktable with washers (2),
circlips (3) and screws (4).
ASSEMBLY
32
STM26 | STM26S