Imetec S3901 Instrucciones De Uso página 20

Remove the tank (2) using the relative handle on the base.
Pour water into the tank, up to the required level. Do not exceed the
EN
maximum level indicated on the tank itself.
Reconnect the tank to the appliance.
The tank can be refilled at any time, even when the appliance is being
used.
IMPORTANT: This product is designed to work with fairly hard tap water (up to 18°F). Do not
used scented water, vinegar or descaling agents.
Insert the power supply plug (1) in the mains socket.
A brief acoustic signal and the illumination of the indicator light (6) will
indicate that the appliance has been switched on. Wait until you hear the
second acoustic signal (about 1 minute), indicating that the iron is ready
for use.
Use the temperature adjustment knob (8) to set the ironing temperature
according to the type of fabric.
WARNING! This appliance is not to be used if it has been
dropped, if there are visible signs of damage or if it is leaking
water.
WARNING! DO NOT pour diluting agents, scented liquids or
descaling agents into the reservoir as the use of these
substances can damage the product.
17
PREPARATION
SWITCH-ON
USE