Publicidad
Idiomas disponibles
Idiomas disponibles
END OF USE
SWITCHING OFF
EN
Remove the plug (1) from the mains socket.
Wait for the product to cool completely before putting it away.
WARNING! Risk of fire. Wait for the appliance to cool
completely before storing it.
When you have finished ironing, empty the tank to avoid water stagnation and the formation of impurities
and bacteria.
To drain the tank:
Remove the tank using the relative handle on the base.
Drain off all the water in the tank.
Reconnect the tank to the appliance base.
MAINTENANCE
Respect the safety warnings when following the procedure below.
CALC CLEAN SYSTEM - Scale removal function.
The scale must be removed whenever the Calc Clean indicator light button (5)
begins flashing and the appliance emits an intermittent acoustic signal.
Make sure there is water in the tank, and that the temperature knob is set to the
CALC CLEAN /MAX position.
Hold the iron above a container or the sink, and
press the CALC CLEAN button for about 2 seconds. The red indicator light will
remain fixed and the iron will begin the cleaning phase (which lasts about 2
minutes). During this time, water, steam and scale particles will emerge from the
plate.
Do not move the iron until the cleaning process has ended.
When the acoustic signal and the indicator light go off, this means the cleaning
process has been completed. Before starting to iron again, wipe the plate with a
cotton cloth to remove any residue.
19
Publicidad
