Descargar Imprimir esta página

K2 Pumps SWW05007K Manual Del Propietário página 4

Publicidad

Idiomas disponibles

Idiomas disponibles

Effluent simplex system with single variable level float switch
Pump disconnect system
All installations must comply with all applicable electrical and plumbing codes, including, but not limited to,
National Electrical Code, local, regional, and/or state plumbing codes, etc. Not intended for use in hazardous
locations.
Suggested methods of float Installation
Determining Pumping Range in Inches (1 inch = 2.5 cm)
Tether Length
Pumping Range
Use only as a guide. Due to weight of cable, pumping range above horizontal is not equal to pumping range
below horizontal. Ranges are based on testing in nonturbulent conditions. Range may vary due to water
temperature and cord shape. As tether length increases, so does the variance of the pumping range.
4
5
10
15
9
13.5
18
Square guide rail system
20
22
22
24
For Professional Technical Support call 1-844-242-2475

Publicidad

loading

Este manual también es adecuado para:

Sww10007kSwf05004kSwf10004k