Maintenance Maintenance And Inspection - Metabo HPT NP 35A Instrucciones Y Manual De Seguridad

NOTE: The information contained in this Manual is designed to assist you in the safe maintenance of the Nailer.
Some illustrations in this Manual may show details or attachments that diff er from those on your own Nailer.
MAINTENANCE AND INSPECTION
Read section titled "SAFETY" (pages 4 – 8).
● Disconnect air hose, remove your fi nger
from the trigger and lock lever, and remove
all nails from Nailer when:
1) doing maintenance and inspection; and
2) clearing a jam.
1. Clearing a jam
Remove a jammed nail in the following order:
1 Disconnect air hose.
2 Remove all nails.
3 Remove the nose with the Allen wrench stored in
the rear of the magazine.
Hexagonal-
socket bolt
Nose
M4×6
Guide groove
4 Remove the jammed nail with a slotted-head
screwdriver.
5 Install the nose.
6 In case of frequent jam, contact a metabo HPT
authorized service center.
2. Storing
○ When not in use for an extended period, apply a thin
coat of the lubricant to the steel parts to avoid rust.
○ Do not store the Nailer in a cold weather environment.
Keep the Nailer in a warm area.
MAINTENANCE
WARNING
Magazine
Blade guide
1
Disconnect air
hose
○ When not in use, the Nailer should be stored in a warm
and dry place.
Keep out of reach children.
3. Warning label
Do not use the Nailer with missing or damaged
WARNING LABEL.
A new warning label is available from a metabo HPT
authorized service center.
Warning label
4. Maintenance chart (page 18)
5. Operator troubleshooting (page 19)
6. Service parts list
CAUTION
Repair, modifi cation
metabo HPT Power Tools must be carried out by
a metabo HPT Authorized Service Center.
This Parts List will be helpful if presented
with the tool to the metabo HPT Authorized
Service Center when requesting repair or other
maintenance. In the operation and maintenance
of power tools, the safety regulations and
standards prescribed in each country must be
observed.
MODIFICATIONS
metabo HPT Power Tools are constantly being
improved and modifi ed to incorporate the latest
technological advancements.
Accordingly, some parts may be changed without
prior notice.
English
and inspection of
17