Publicidad
Idiomas disponibles
Idiomas disponibles
Mounting
Mount Sensor with Strap
To mount the sensor with a strap, pass the strap through
the alignment brackets provided.
Make sure that the sensor cannot move during opera-
tion.
Electrical Installation
Application Option 1 and 2
You can connect the sensor to your pump via
Bluetooth
to send level information directly to the pump.
®
The pump is thus able to output corresponding status
messages, which can be monitored e. g. via
DULCONNEX or PLC. For more information, please refer
to the original operating instruction of your pump.
1. Connect plug-inpower supply to sensor (A).
2. Plug in power supply (B).
A
B
11
EN
Publicidad
