Publicidad
Idiomas disponibles
Idiomas disponibles
Operation
Firmware Update
You can see the current firmware version in the sensor's
settings under "Information".
Procedure:
1. In the "Devices" view, tap on the sensor.
2. Tap on "Service".
3. Tap on "Firmware update".
4. If there is a newer firmware, follow the instructions in
the app.
Disconnect Sensor
You can disconnect the sensor at any time via the app.
Procedure:
1. In the "Devices" view, tap the sensor or the pump.
2. Press the "Connection settings" button.
3. Tap the "Disconnect" button.
4. Confirm the disconnection process with "OK".
If you also want to delete the sensor from the devices list,
switch to the "Coupled" tab and tap the "Delete" button
on the sensor.
Cleaning
NOTICE
Unsuitable cleaning products can damage the sensor.
Do not use chemicals or strong detergents.
„
Clean the sensor with a dry cloth.
„
15
EN
Publicidad
