Publicidad
Idiomas disponibles
Idiomas disponibles
Overview
Nameplate
The nameplate contains the most important data for
identification and use of the sensor.
Type
DulcoLevel
El. connection
18 - 30 V
1.8 W
0.1 A
max
Measuring range
0.1 - 5m
IP66
Notice: You need the last 4 digits of the serial number
(Ser.No. on the nameplate) to connect the sensor with
the DULCONNEX Blue App (see Initial Start-up).
In the example shown, this corresponds to the digits
"8234".
Notice: The QR code on the nameplate is for
ProMinent internal purposes only.
The device meets the requirements for electrical safety
according to EN 61010-1. The device meets the require-
ments of the Radio Equipment Directive 2014/53/EU and
the RoHS Directive 2011/65/EU and is CE marked.
ProMinent GmbH
Im Schumachergewann 5-11
69123 Heidelberg, Germany
Mat.No. 1120573
Ser.No.
e. g. 20220808234
MD:
e. g. 07/2022
Contains FCC ID: QOQGM210P
Contains IC ID: 5123A-GM210P
Function
The level sensor DULCOLEVEL is a radar sensor for
level measurement of all types of liquids in plastic
tanks and IBC storage tanks:
Measures the distance between the sensor and
„
the surface of the liquid.
Contactless measurement through the plastic wall
„
of the tank.
Suitable for all ProMinent plastic storage tanks as
„
well as plastic tanks from other suppliers.
Configure the sensor by using the DULCONNEX
Blue App.
Notice: Use of a Mixer
When using a mixer, the height of the liquid level may
change. This can lead to incorrect measurement
results. An even liquid level is required for a reliable
measurement result. Select the measuring point out-
side the flow if possible.
7
EN
Publicidad
