STERWINS ESH2-40.4 Manual De Instrucciones página 172

H) Do not allow processed material to build
up in the discharge zone; this may prevent
proper discharge and can result in kickback of
material through the feed intake opening.
I) If the machine becomes clogged, shut-off
the power source and disconnect the machine
from supply before cleaning debris.
J) Never operate the machine with defective
guards or shields, or without safety devices,
for example debris collector in place.
NOTE If a debris collector is not used the text
of the example may be deleted.
K) Keep the power source clean of debris and
other accumulations to prevent damage to
the power source or possible fire.
2.9 SHREDDER SAFETY WARNINGS : MAINTENANCE AND STORAGE
A) When the machine is stopped for
servicing, inspection, or storage, or to change
an accessory, shut off the power source,
disconnect the machine from the supply and
make sure that all moving parts are come to
a complete stop. Allow the machine to cool
before making any inspections, adjustments,
etc. Maintain the machine with care and keep
it clean.
B) Store the machine in a dry place out of the
reach of children.
2.10 SHREDDER SAFETY WARNINGS : ADDITIONAL SAFETY INSTRUCTIONS FOR
UNITS WITH BAGGING ATTACHMENTS
Switch-off the machine before attaching or removing the bag.
2.11 SHREDDER SAFETY WARNINGS: RECOMMENDATION
The machine should be supplied via a residual current device (RCD) with a tripping current of
not more than 30 mA. Before using, always visually inspect to see, that the shredding
shredding means bolts and other fasteners are secure, the housing is undamaged and that
guards and screens are in place. Replace worn or damaged components in sets to preserve
balance. Replace damaged or unreadable labels. Use only genuine replacement parts and
accessories.
L) Do not transport this machine while the
power source is running.
M) Stop the machine, and remove plug from
the socket. Make sure that all moving parts
have come to a complete stop
- whenever you leave the machine,
- before clearing blockages or unclogging
chute,
- before checking, cleaning or working on the
machine.
N) Do not tilt the machine while the power
source is running.
C) Always allow the machine to cool before
storing.
D) When servicing the shredding means be
aware that, even though the power source is
switched off due to the interlock feature of
the guard, the shredding means can still be
moved.
E) Replace worn or damaged parts for safety.
Use only genuine replacement parts and
accessorises.
F) Never attempt to override the interlocked
feature of the guard.
171
FR
ES
PT
IT
EL
PL
RU
KZ
UA
RO
EN
means,