STERWINS ESH2-40.4 Manual De Instrucciones página 173

FR 2.12 ADDITIONNAL SHREDDER SAFETY WARNINGS
• WARNING: In some countries regulations
define at what time of the day and on
what special days products are allowed to
ES
be used and what restrictions apply! Ask
your community for detailed information
and observe the regulations in order to
preserve a peaceful neighbourhood and avoid
PT
committing administrative offences!
Only operate the product at reasonable hours
- not early in the morning, late at night or on
IT
weekends/public holidays when people might
be disturbed. Inform yourself about local
restrictions.
EL
2.13 VIBRATION AND NOISE REDUCTION
To reduce the impact of noise and vibration emission, limit the operating time, use low-vibration
and low-noise operating modes, and wear personal protective equipment. Take the following
PL
points into account to minimise the vibration and noise exposure risks:
1. Only use the product as intended by its design and these
2. Ensure that the product is in good condition and well maintained.
3. Use correct attachments for the product and ensure they are in good condition.
RU
4. Keep tight grip on the handles/grip surface.
5. Maintain this product in accordance with these instructions and keep it well lubricated
(where appropriate).
6. Plan your work schedule to spread any high vibration tool use across a longer period of time.
KZ
2.14 RESIDUAL RISKS
Even if you are operating this product in accordance with all the safety requirements,
UA
potential risks of injury and damage remain. The following dangers can arise in connection
with the structure and design of this product:
→ Health defects resulting from vibration emission if the product is being used over long
periods of time or not adequately managed and properly maintained.
RO
→ Injuries and damage to property due to broken cutting attachments or the sudden impact of
hidden objects during use.
→ Danger of injury and property damage caused by flying objects.
EN
→ Prolonged use of this product exposes the operator to vibrations and may produce
'whitefinger' disease. In order to reduce the risk, please wear gloves and keep your hands
warm. If any of the 'whitefinger' symptoms appear, seek medical advice immediately.
'Whitefinger' symptoms include: numbness, loss of feeling, tingling, pricking, pain, loss of
strength, changes in skin colour or condition. These symptoms normally appear in the fingers,
hands or wrists. The risk increases at low temperatures.
2.15 SERVICE
Have your power tool serviced by a qualified repair person using only identical replacement
parts. This will ensure that the safety of the power tool is maintained.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in
order to avoid a hazard.
If the carbon brushes need to be replaced, have this done by a qualified repair person (always
replace the two brushes at the same time).
• Longer material standing out from the
shredder could lash out when being pulled in
by the blades. Keep a safe distance.
• Dust from some paints, coatings and
materials may cause irritation or allergic
reactions. Dust from wood like oak, beech,
MDF and others are carcinogenic. Materials
containing asbestos must only be worked or
treated by qualified specialist operators.
• Maintain labels and nameplates on the
appliance. These carry important safety
information. If unreadable or missing, contact
the point of purchase for a replacement.
instructions.
172