Publicidad
Idiomas disponibles
Idiomas disponibles
POSITIONING YOUR WINE AND BEVERAGE COOLER
• It is important for the appliance to be leveled in order to work properly. You
may need to make several adjustments to level it.
• To level your appliance, adjust the front legs at the bottom of the appliance.
• When positioning the appliance, ensure that there is at least a 1/4-inch
clearance at the sides and a 1-inch clearance at the back of the cooler as this
is the main outlet for heat. This will allow for adequate ventilation.
HANDLE INSTALLATION
• Pull away the door gasket in the area where the handle is to be installed. The
gasket is easily removed by hand, no tools are necessary.
• Insert the two (2) Phillips head screws with the lock washers and flat
washers through the gasket side of the door frame until the screws pass
through the door frame. Follow the sequence shown in the figure.
• Align the handle with the screws installed in the above step. Tighten the
screws using a Phillips head screwdriver until the handles secure tightly
against the door frame. (Do NOT over tighten) Replace the gasket.
www.newair.com
EN
10
Publicidad
