TROUBLESHOOTING
Problem
The wine and
beverage cooler
does not cool.
The wine and
beverage cooler
does not get cold
enough.
The wine and
beverage cooler
seems to make too
much noise.
An interior red
light is flashing.
Frost is building up
in the unit.
www.newair.com
Possible Causes
The unit may be plugged
in using a different
voltage.
The circuit breaker may
be tripped or there is a
blown fuse.
The unit may be placed
too close to a heat
source.
There is insufficient
ventilation.
The door is not
completely closed or the
door seal is not working
properly.
The unit is not leveled or
positioned properly.
There is insufficient
ventilation.
The unit is too close to a
wall or other surface.
The set temperature is
too low.
The automatic defrost
function is working.
There is excess humidity
or the interior
temperature is too low.
Solution
Check if using the wrong
voltage.
Reset the circuit breaker or
check for a broken fuse.
Keep the unit away from
direct sunlight or other heat
sources.
Place the unit in an area with
proper ventilation and
clearances.
Close the door tightly. Do not
open the door frequently or
keep the door open for
extended periods.
Adjust the unit's feet and
ensure the product is level.
Allow sufficient clearance
around the unit.
Allow sufficient clearance
around the unit.
Adjust the set temperature so
that it is higher than the unit's
interior temperature
Normal function. No repair
needed.
Turn the unit off, unplug it
and remove the frost
manually. Reconnect once the
ice has thawed.
EN
17