Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY INFORMATION & WARNINGS
Before Using Your Wine and Beverage Cooler for the First Time:
Carefully read all instructions before using this wine and beverage
cooler for the first time. Also make sure the wine and beverage
cooler stays in an upright position during transportation. After
removing the appliance from its packaging, make sure it is in good condition,
and let the fridge stand for 24 hours before connecting to power, to allow
refrigerant to settle. If there are any issues with the wine and beverage cooler,
please contact us immediately.
• Place the appliance on a level floor surface that will be strong enough to
support it when it is at full capacity. To level the wine and beverage cooler
adjust the leveling feet located at the bottom of the appliance.
• Do not use this wine and beverage cooler in applications for which it is not
intended. Damage that occurs from improper use or from unauthorized
repairs will void the warranty.
• For proper air circulation, please maintain a 2-inch minimum clearance in
between the back of the wine and beverage cooler and the wall.
• Do not operate this wine and beverage cooler in excessively moist or humid
environments.
• Keep the wine and beverage cooler away from direct sunlight.
• Keep the wine and beverage cooler away from hazardous materials or
combustible/flammable substances.
CAUTION:
• This wine and beverage cooler is designed for built-in or freestanding
applications.
DANGER: RISK OF CHILD ENTRAPMENT:
An empty wine and beverage cooler can be dangerous to children. Remove
any latches, lids, locks, and/or doors from unused or discarded appliances to
prevent child entrapment and suffocation. Never allow children to operate,
play with or crawl inside this appliance.
www.newair.com
EN
7
Publicidad
