Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Powers on/off the appliance. To turn off the appliance, touch
Power
the
Light
To control the interior light to turn on/off.
Used to increase the corresponding zone set temperature by
Up
1℃ or 1℉.
Used to decrease the corresponding zone set temperature by
Down
1℃ or 1℉.
Selects the temperature display setting to display in
℃/℉ Selector
Fahrenheit or Celsius.
SETTING THE TEMPERATURE
• The left zone temperature can be set between 36°and 72℉, and the right
zone temperature can be set between 36°and 72℉.
• The temperature will increase by 1℃ or 1℉ if you touch UP
temperature will decrease by 1℃ or 1℉ you touch DOWN
• To view the set temperature at any time, touch the UP or DOWN marks. The
set temperature will temporarily flash in the LED display for 5 seconds.
• The internal storage temperature will appear in blue on the temperature
display window.
NOTE:
If the unit is unplugged, turned off, or power is lost, you must wait 3 to 5 minutes before restarting
the unit. If you attempt to restart before this time delay the unit will not start. When you use the
unit for the first time or restart the unit after having been shut off for a long time, there could be a
few degrees variance between the temperature you select and the one indicated on the LED
readout. This is normal and it is due to the length of the activation time. Once the unit is running
for a few hours everything will normalize.
www.newair.com
mark and hold 5 seconds.
EN
once, or the
once.
11
Publicidad
