pico Technology MT03A Guía De Seguridad página 34

Idiomas disponibles

MT03A Milliohm and Motor Tester

Milliohm and Motor Tester

The MT03A Milliohm and Motor Tester is designed for the measurement of low-resistance

circuits.

It includes three resistance measurement connections that enable rapid testing of all three phases

of motor windings and a temperature sensor to provide compensated resistance values. It is also

used for general milliohm and earth bond testing.

To prevent possible electrical shock, fire, personal injury or damage to the product, carefully

read this safety information before attempting to install or use the product. In addition, follow all

generally accepted safety practices and procedures for working with and near electricity.

The product has been designed and tested in accordance with the European standard publication

EN 61010-1:2010+A1:2019 (Safety Requirements for Electrical Equipment for Measurement,

Control and Laboratory Use). The product left the factory in a safe condition.

The following safety descriptions are found throughout this guide:

A WARNING identifies conditions or practices that could result in injury or death.

A CAUTION identifies conditions or practices that could result in damage to the product or

equipment to which it is connected.

Symbols

These safety and electrical symbols may appear on the product or in this guide.

Symbol Description

Direct current

Alternating current

Earth (ground) terminal

Chassis ground terminal

Double insulated

Possibility of electric shock

Caution*

Static awareness. Static discharge can damage parts.

Do not dispose of this product as unsorted municipal waste.

Resistance testing capability

*Appearance on the product of this symbol indicates a need to read this safety document

or the product operating instructions or both.

Safety Guide

DO363-1