pico Technology MT03A Guía De Seguridad página 5

Idiomas disponibles

Safety Guide

This product is for professional use by trained and qualified technicians only.

To prevent injury or death use the product only as instructed and use only accessories that have

been supplied or recommended by Pico Technology. Protection provided by the product may be

impaired if used in a manner not specified by the manufacturer.

MAXIMUM TERMINAL RATINGS

This product is for use only on disconnected circuits where no voltages are present. To prevent

injury or death, do not connect the input terminals to an electrical node unless you have first

confirmed that the node is de-energized.

To prevent electric shock, take all necessary safety precautions when working on equipment

where hazardous live voltages may be present.

To prevent injury or death, do not directly connect the product to the utility power (line power) or

a vehicle traction battery pack and associated power converters.

Always follow relevant industry standard safety procedures and use appropriate personal

protective equipment (PPE) where applicable.

Attempting to measure the resistance of a conductor where a voltage is present will give

inaccurate readings and may damage the product and any other accessories connected to your

PC.

GENERAL SAFETY GUIDANCE

To prevent injury or death, do not use the product or an accessory if it appears to be damaged in

any way, and stop use immediately if you are concerned by any abnormal operations.

The product's ground connection through the USB cable is for measurement purposes only. It

does not have a protective safety ground.

To avoid entrapment, take care to route any cables away from moving parts.

To avoid the melting of cables take care to route them away from hot engine and electrical

components when using this product.

DO363-1

MT03A Milliohm and Motor Tester

WARNING

CAUTION

WARNING

CAUTION