NOTE :
▪ Turning the temperature control to "0" position stops the cooling cycle but does not
shut off the power to the refrigerator.
▪ If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before
▪ Restarting the unit. If you attempt to restart before this time delay, the refrigerator will
not start.
▪ If you choose to change the thermostat setting, adjust thermostat control by one
numerical increment at a time. Allow several hours for temperature to stabilize
between adjustments.
Do not leave the door open for too long so that the indoor temperature does not rise
too much.
"COLD ZONE" SYMBOLS (Depending on models)
You will find the symbol opposite in your refrigerator. It clearly shows the
location of your appliance's coldest zone: the temperature here is + 4°C or
less. A temperature indicator here enables you to check that your refrigerator
is working correctly.
TEMPERATURE INDICATOR (Depending on models)
Temperature to set
Correct temperature
WARNING:
Prolonged opening of the door will cause the internal temperature to rise. You must
therefore read the indicator within 30 seconds of the door being opened for the
reading to be correct.
5. FOOD CONSERVATION
The storage of foodstuffs must comply with the regulatory conservation temperatures
established by the National Agency for Food, Environmental and Occupational Health Safety
(ANSES). Failure to comply with these storage temperatures involves risks of poisoning and food
waste.
29