Enerpac SQD Serie Manual De Instalación página 4

WARNING: To avoid personal injury, keep
hands away from reaction arm and working
area during operation. See also
CAUTION: Incorrectly connec-
ted hoses cause malfunctions
and are hazardous. See
page 7. Do not change coupler
positions on wrench equipment.
Clean coupler halves before connecting. Use
dustcaps after disconnecting.
seal damage, do not swivel couplers while
system is under full pressure.
IMPORTANT: Enerpac THC-700
series 3,5:1 safety twin hoses
must be used with double-acting
torque wrenches.
IMPORTANT:
hydraulic equipment by the
hoses or swivel couplers. Use
the carrying handle or other
means of safe transport.
2
2
CAUTION: Do not use worn or damaged
sockets or Allen-Key drives. They must fit
precisely on the nut or bolt being torqued.
Do not use metric size sockets or Allen-key
drives on imperial bolts and nuts or reverse.
13
(page 8).
10
on
To prevent
Do not lift
4
WARNING: Use only Heavy
Duty Impact sockets for power
driven
according to ISO-2725 and
ISO-1174; DIN 3129 and DIN 3121, or
ASME-B107.2/1995.
3
3
WARNING: Always secure the socket to
the square drive to prevent the socket from
slipping off.
4
1
CAUTION: +
Allen-key drives (8) must be used when
inserting the Allen-key drive (7) for socket
head cap screws.
machine wrenches,
4
. The reaction arm for