Enerpac SQD Serie Manual De Instalación página 5

5
6
shearing. Maximum torque of Allen-key
drives are specified in tables
failure. These failures could result in bolt or
insert pieces being projected from the
wrench or bolting site. Failures will also result
in the torque wrench unit moving rapidly
away from the torquing point causing
potential injury to the operator.
CAUTION:
properly positioned manually to make sure
the reaction force is safely transmitted via
the reaction arm and not via other torque
wrench parts. Do not use the torque wrench
without the reaction arm.
WARNING:
must be used to secure the reaction arm on
the wrench body to prevent from slipping off.
It must "click" in the slot of the reaction arm.
CAUTION:
"CLICK"
not use extensions. If this is unavoidable due
to the reaction point, the torque (pressure)
must be reduced. An extra support must be
used to minimize tilting and friction. When in
doubt, contact Enerpac.
5
WARNING: Do not exceed
maximum torque of Allen-key
drives to avoid danger of Allen-
key drive failure and bolt-
WARNING:
maximum torque for a bolt size
or Allen-key drive will result in
bolt shearing and potential parts
5
The torque wrench must be
6
The locking mechanism (3)
7
7
Avoid tilting the wrench. Do
A1 A2
and .
Exceeding the