EAS ELECTRIC EMW580E2 Manual De Usuario página 53

Washing the filter in washing machine:
1. Screw off the inlet pipe from the backside of the machine.
2. Pull out the filter with long nose pliers and reinstall it back
after being washed.
3. Reconnect the inlet pipe.
4. Open the tap and make sure there is no water leakage.
5. Close the tap.
Notes: Generally, the tap filter is washed first and then the filter in washing
machine will be washed. If only the filter in washing machine is washed, then the
steps 1~3 in cleaning the tap filter shall be repeated.
WARNING
Pull out the power plug to avoid electrical shock before washing.
After using the washing machine, pull out the power cord and close the door
tightly to avoid pinching the kids.
Remove foreign matters
Drain Pump Filter:
Drain pump filter can filter the yarns and small foreign matters from the
washings. Clean the filter periodically to ensure the normal operation of washing
machine.
WARNING
First, drain the water with drain pump and then open the drain pump to clean
away foreign matters from drain pump filter.
Take care if the drained water is hot.
Cleaning the pump
Important!
According to the soil level within the cycles and the frequency of the cycles, you
have to inspect and clean the filter regularly.
V. 1
53