Uline H-1024 Manual De Instrucciones página 6

PROBLEM
Excessive jams
Uneven clinch
Unclinched staple
PAGE 6 OF 18
TROUBLESHOOTING
WARNING! Stop using the stapler immediately if any of the following problems
occur. Serious personal injury could occur. Any repairs or replacements must
be done by a qualified person or authorized service center only.
CAUSE
Teeth screws are loose or
staples are wrong size.
Wrong staple size.
Teeth are loose or broken.
REMEDY
Tighten screws and check staples.
Check for proper leg length adjustment and
clincher size.
Check and replace teeth as needed.
1-800-295-5510
uline.com
0323 IH-1024