Dreame DreameBot D10s Manual Del Usuario página 8

How to Use
EN
9. Additional App Functions
Follow the instructions on the app interface to use more functions. The version
of the app might have been updated; please follow the instructions based on
the current app version.
10. Use the Mopping Function
It is recommended that all floors are vacuumed at least three times before
the first mopping session to achieve a better cleaning effect.
1) Dampen the mop pad and wring out excess water. Install the mop pad as
shown in the diagram.
① ② ③
12
2) Fill the tank with water.
Note: Do not use detergent or disinfectant.
3) Align the mopping module as indicated by the arrow, then slide it into the
back of the robot until it clicks into place. Press the button or use the
Dreamehome app to start cleaning.
Click
Click
Note:
• It is not recommended to use the mopping function on carpets.
• Use the app to adjust the water flow as required.
Routine Maintenance
To keep the robot in good condition, it is recommended to refer to the following table for routine maintenance.
Maintenance
Part Replacement Period
Frequency
Mop pad After each use Every 3 to 6 months
Main brush Every 6 to 12 months
Dust bin filter Once every 2 weeks
Every 3 to 6 months
Side brush
Charging dock's
signaling area
Charging contacts
Universal wheel Once every month /
Laser Distance
Sensor (LDS)
Cliff sensors
Water tank
Clean it as needed /
Dust bin
Note: The replacement frequency will depend on your usage of the robot.
If an exception occurs due to special circumstances, the parts should be
replaced.
EN
13