Nilfisk MC 2C-80/520 US-CAN Manual De Instrucciones página 9

After finishing the work
• Always switch off the machine and unplug the power
plug from the socket after work and when leaving the
machine unattended.
• Disconnect water inlet hose between machine and
water supply.
• Always empty pump, hose and accessories of water
after use of the machine and prior to storing.
Maintenance and repairs
• Always disconnect the electrical plug from the socket
prior to maintenance, cleaning and repair.
• Any repair should always be made in Nilfisk autho-
rized workshop with original Nilfisk spare parts.
• Do not attempt any maintenance not described in the
instructions.
• If the machine refuses to start, stops, pulsates, pres-
sure fluctuates, motor busses, fuse blows or no wa-
ter comes out, check the trouble shooting diagram
in these instructions. In case other problems occur,
please contact your local Nilfisk distributor.
Correct disposal of this product:
This marking indicates that this product should not be
disposed with other household wastes throughout the
EU. To prevent possible harm to the environment or hu-
man health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of mate-
rial resources. To return your used device, please use
the return and collection systems or contact the retailer
where the product was purchased. They can take this
product for environmental safe recycling.
Original Instructions
WARNING!
WARNING!
9