cecotec CONGA WINDROID 880 SPRAYWATER CONNECTED Manual De Instrucciones página 45

Dry mode
- The machine can operate in every mode without activating the spraying.
Spraying mode
- To start the spraying you need to press
robot will spray every 3 seconds. If you select the manual mode
time you want the robot to spray.
- Manual mode operation
- You must press
- You must also indicate the route you want the robot to follow.
Automatic mode
You can choose between 3 route modes:
1. Left-down.
2. Right-down
3.
Up-down.
- You can also select the automatic spraying mode
the water from the tank.
- Remember that the 3-second frequency has been stablished according to the natural
operation of the device, so with the automatic mode, you will get good results.
Cleaning instructions
Manual spraying mode.
every time you want the robot to spray.
Step 1. Dry cleaning
- For the first use, you must use the "dry mode". Do not
activate the spray mode or spray water/glass cleaner.
If the surface to be cleaned has too much sand, remove
the sand previously.
- If the surface to be cleaned has a lot of sand, it could
form mud when spraying. Cleaning would not have an
or . If you select the automatic mode
. The robot will spray every 3 seconds
ENGLISH
, the
, you can press every
45