Steinberg Systems SBS-PT-200S Manual De Instrucciones página 53

2. Wait until the reading stabilizes.
3. Press the "TARE" button and leave the object on the platform. The display will
indicate a value of 0.
4. Add the object on the platform. The display will indicate the weight of the
second object only.
5. Repeat as necessary, not exceeding the maximum load value of the scale.
C. "UNIT" button:
Press to change the weighing unit.
D. "HOLD" button:
1. Place the object on the weighing platform.
2. Wait until the reading stabilizes.
3. Press the HOLD button. The display will show the "HOLD" button.
4. Remove the object from the weighing platform. The reading will still remain
visible on the display.
* For models SBS-PT-30SN; SBS-PT-150SN; SBS-LW-40, the reading remains visible
for 120 seconds after removing the weight.
5. Press the "UNIT" button to convert the reading value to another measurement
unit.
6. Press the "HOLD" button to return to normal operation.
* For SBS-PT-30SN; SBS-PT-150SN models, when the "HOLD" button is held down,
the data from the scale is transferred to the computer.
E. "ZERO/TARE" button:
• if the weighing platform is empty: in case the display shows a value other than 0,
press the "ZERO/TARE" button to zero the value on the display and only start
weighing
• if the weighing platform is not empty (tare function):
• place the object on the platform when the unit is on
• wait until the reading stabilizes
• press the "ZERO/TARE" button and leave the object on the platform. The display
will indicate a value of 0
• add another object on the platform. The display will indicate the weight of the
second object only
• repeat as needed, not to exceed the maximum load value of the scale
SETTINGS