Steinberg Systems SBS-PT-200S Manual De Instrucciones página 54

A. SBS-PT-200S; SBS-PT-100S; SBS-PT-200SB; SBS-PT-100SB1:
1. Auto sleep function:
Hold the "HOLD" button for a few seconds, then press the "ON/OFF" button.
The display will show "A-ON" (enable the auto sleep function) or "A-OFF"
(disable the function). Press the "ZERO" button to select "A-ON" or "A-OFF".
2. Display backlight function:
Press the "HOLD" button again. Press the "HOLD" button again.
The display will show "L-ON" (enable the display backlight function) or "L-OFF"
(disable the function). Press the "ZERO" button to select "L-ON" or "L-OFF".
3. Readout retention function:
Press the "HOLD" button again. The display will show "H_ON" (enable the read
retention function when the weight is removed from the platform) or "H_OFF"
(disable the function). Press the "ZERO" button to select "L-ON" or "L-OFF".
4. To return to normal weighing mode, turn the unit off and then back on with the
"ON/OFF" button.
B. SBS-PT-200SK; SBS-PT-100SK:
1. Auto sleep function:
Turn off the unit. Hold down the "ZERO" button for a few seconds, then press
the "ON/OFF" button simultaneously. The display will show "A-OFF" (disable
auto sleep function). Press the "ZERO" button to select "A-ON" (enable
function) or "A-OFF".
2. Display backlight function:
Press the UNIT button. Press the "HOLD" button again.
The display will show "L-ON" (enable the display backlight function) or "L-OFF"
(disable the function). Press the "ZERO" button to select "L-ON" or "L-OFF".