Steinberg Systems SBS-PT-200S Manual De Instrucciones página 59

• While holding down the "HOLD" button, turn on the unit with the "ON/OFF"
button. The display will show "A._".
• Press the "HOLD" button four times. The display will indicate the message "U._".
• Press the "ZERO" button until it reaches to select the measurement unit selection
option "U.on" or the measurement option off in kg "U.off".
6. Function of "HOLD" button:
• While holding down the "HOLD" button, turn on the unit with the "ON/OFF"
button. The display will show "A._".
• Press the "HOLD" button five times. The display will indicate the message "K._".
• Press the "ZERO" button until it is done to select the option of the function to be
performed by the "HOLD" button: retaining the reading "K.PCS" or calculating the
number of pieces on the platform "K.HOLD".
CAUTION! Press the "ON/OFF" button to save changes and exit the setting menu.
E. SBS-LW-40:
1. Auto sleep function:
While holding down the "ZERO/TARE" button, turn on the unit with the
"ON/OFF" button. The display will show "A_ON" or "A_OFF". Press the
"ZERO/TARE" button until it is pressed to select the option to activate "A_ON"
or deactivate "A_OFF" of the auto sleep function.
2. Display backlight function:
Press the UNIT button. The display will indicate "L_ON" or "L_OFF". Press the
"ZERO/TARE" button until it stops to select the option to activate "L_ON" or
deactivate "L_OFF" of the display backlight function.
3. Automatic reading retention function:
Press the UNIT button. The display will indicate "H_ON" or "H_OFF". Press the
"ZERO/TARE" button until it reaches to select the option to activate "H_ON" or
deactivate "H_OFF" of the automatic reading retention function.
4. Press the "ON/OFF" button to turn off the unit saving the changes.