Specifications
This section lists the S4112-ON Series (S4112F-ON and S4112T-ON) switch specifications.
CAUTION: Operate the product at an ambient temperature not higher than 45°C
(113°F).
CAUTION: Lithium Battery Caution: There is a danger of explosion if the battery
is incorrectly replaced. Replace only with same or equivalent type of battery.
Dispose of the batteries according to the manufacturer's instructions.
NOTE: For RoHS information, see
Chassis physical design
Table 1. Chassis physical design
Parameter
Height
Width
Depth
Chassis weight with factory-installed
components
Rack clearance required
Table 2. Environmental parameters
Parameter
Operating temperature
24
Restricted Material
Compliance.
Specifications
1.75 inches (41.25 mm)
8.2 inches (209 mm)
17.7 inches (450 mm)
S4112F-ON: 8.30 lbs, 3.76 kg (2 PSUs and 3
fans)
S4112T-ON: 8.45 lbs, 3.81 kg (2 PSUs and 3
fans)
Front: 5 inches (12.7 cm)
Back: 5 inches (12.7 cm)
Specifications
5°C to 40°C (50°F to 104°F) continuously
-5°C to 45°C (23°F to 113°F) short term
Short term is </= 1% of operational hours
per year.