SOLAC MV1501 Instrucciones De Uso página 8

ENGLISH
Dear customer,
Thank you for deciding to purchase a SOLAC
brand product.
Thanks to its technology, design and operation
and the fact that it exceeds the strictest quality
standards, a fully satisfactory use and long pro-
duct life can be assured.
WARNING: Your steam mop
•
is designed to clean hard floor
surfaces that will withstand
high heat. Do not us on un-
sealed wood or unglazed ce-
ramic floors. On surfaces that
have been treated with wax or
some no wax floors, the sheen
may be removed by the heat
and steam action. It is always
recommended to test an iso-
lated area of the surface to be
cleaned before proceeding .
We also recommend that you
check the use and care instruc-
tions from the floor manufactu-
rer.
IMPORTANT : Do not store unit
•
with damp/wet micro-fiber cle-
aning pad attached. Never lea-
ve the steam mop in one spot
on any surface for any period
of time with a damp or wet mi-
cro-fiber cleaning pad attached
as this will damage your floors.
IMPORTANT : Do NOT sto-
•
re cleaning solutions, scented
perfumes, oils or any other
chemicals to the water used
in this appliance. If you live in
a hard water area, we recom-
mend using distilled water in
yous steam mop.
WARNING: Danger of
Scalding. Please use cau-
tion when using the steam
mop. The steam emitted from
the openings is very hot.
DESCRIPTION
1. Select switch
2. Cover for buttery box
3. Cord wrap
4. Tube
5. Release button for water tank
6. Release button
7. Water tank
8. Power on light
9. Power switch
10. Main body
11. Mop head
1. 1 Docking tray
2. 1 Carpet glider
3. 2 Cleanning pads
Read these instructions carefully before swit-
ching on the appliance and keep them for future
reference. Failure to follow and observe these
instructions may result in an accident.
BEFORE USE:
Peel off appliance's protective film.
•
Make sure that all the product's packaging has
•
been removed.
Certain parts of the appliance have been lightly
•
greased, consequently, the appliance may give
off a light smoke the first time it is used. After a
short time, this smoke will disappear.
Prepare the appliance according to the func-
•
tion you wish to use.
INSTRUCTIONS FOR USE
Remove all the parts from the packaging.
•
Take out the handle,open the cover for buttery
•
box,put 2*AAA buttery in it,and close the cover.
(Fig. 1)
After assembled,insert handle into the tube.
•
(Fig. 2)
Push it in until you hear it click into place.
•
EN