Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
Power indicator light
(Model 9216 only)
When you plug your tool into the power source,
the power indicator light will go "ON" indicating
the tool is receiving power (Fig. 4).
Trigger "ON-OFF" switch
TO TURN THE TOOL "ON" squeeze the trigger
switch. TO TURN THE TOOL "OFF", release
the trigger switch, which is spring loaded and
will return to the "OFF" position automatically
(Fig. 4).
Variable speed dial
Your tool is equipped with a variable speed
dial. The blade stroke rate may be adjusted
during cutting operation by presetting the dial
on or between any one of the six numbers (Fig.
5).
Setting
S PM rating
(strokes per minute)
1-2
Low stroke
3-4
Medium stroke
5-6
High stroke
Higher speed settings are generally used for
fast cutting or when softer cutting materials
such as wood, composite materials, and plastics. Slower speed settings are generally used
when precision is required or when cutting harder materials. Materials typically cut using slow-
er speeds include sheet metal, conduit, and pipe.
Fig. 4
Power
Indicator Light
Fig. 5
Variable Speed
Dial
Trigger
"On-Off"
Switch
11
Publicidad
