Publicidad
Idiomas disponibles
Idiomas disponibles
Using the Air Conditioner
Quiet Mode
Quiet mode will ensure the most quiet mode of
operation to satisfy the set temperature and provide
room comfort in the space to be cooled. It is normal for
the unit to operate for a longer period at lower energy
consumption levels to achieve this. It is normal to hear
Air Direction
Care and Cleaning
Grille and Case
Turn the air conditioner off and remove the plug from the
wall outlet before cleaning.
Filters
All filters should be checked and cleaned at least every
250 hours or more often if necessary. Clean the filters
with warm, soapy water. Rinse and let filters dry before
replacing it. Do not clean the filters in a dishwasher.
Front Filter:
Access the Front Filter by first opening the inlet grille.
Pull the tabs on the top sides of the grille towards
you and set it aside. From here, pull down on the top
black tabs on the filter. Once the top of the filter has
been popped out of place, lift upwards on the filter and
remove it from the device.
Side Filter:
Locate the tab on the left side of the unit and pull the
filter straight out.
Plug Filter:
NOTE: Water will not come out after removing the
cap, however it will begin to drain as soon as the Plug
Filter is removed. Ensure to have the proper means of
collecting water under the unit before removing the plug.
Locate the drain cap on the right side of the unit.
Remove the cap, and pull the plug straight out.
49-5000765 Rev. 0
the unit switching speeds if it senses the room becoming
uncomfortable.
Note: It is not suggested to use QUIET MODE when the
temperature is above 104ºF(40ºC).
To clean, use water and a mild detergent. Do not use
bleach or abrasives.
CAUTION
DO NOT operate the air conditioner
without a filter because dirt and lint will clog it and reduce
performance.
Side Filter
Inlet Grille (Front Filter
is behind Inlet Grille)
Drain Cap (Plug Filter is
behind Drain Cap)
7
Publicidad
