Publicidad
Idiomas disponibles
Idiomas disponibles
NODE COMPONENTS
This section provides an overview of some of the components of the
NODE. Each item will be discussed in further detail later. However, this
section can be helpful in getting acquainted with the di erent options
available.
Control Buttons
Button – Increases the selected ashing display
1.
Button – Decreases the selected ashing display
2.
Button – Selects programming function
3.
4.
Button – Advances the selected ashing display back to the
next item
Button – Navigates the selected ashing display back to the
5.
previous item
Button – Selects the program (A, B, or C)
6.
3
LCD Display
1.
Main Display – Indicates all program information
2. Station Number – Indicates the station number being programmed
3. Start Time Number – Indicates the start timer number being
programmed
4. Program – Indicates the program (A, B, or C)
5.
Current Time/Day – Indicates when current day/time is
being set
6.
Start Times – Indicates when start times are being set
7.
Run Times – Indicates when Run Times are being set. Allows
user to set run times from one minute to six hours.
8.
Watering Days – Allows the user to select individual days to
water or a selected number of days between watering (interval)
9. % Seasonal Adjustment – Allows the seasonal adjustment to be
programmed form 10–150% (default value is 100%)
10.
System O – Indicates that watering is suspended
11.
Manual On/O – Indicates when manual watering is
programmed. Allows the user to activate the station manually.
12. MV – Indicates that station one is set to master valve operation
(only available on two-, four-, or six-station models)
Battery Status – Indicates remaining battery life
13.
14.
Umbrella – Indicates the rain sensor is suspending irrigation
15.
Crossed Umbrella – Indicates the rain sensor has been
manually bypassed
EN
Publicidad
