Publicidad
Idiomas disponibles
Idiomas disponibles
fry under continuous supervision.
Clean the filters on time.
Ÿ
Follow the instructions in the manual for cleaning or
Ÿ
replacing the grease filters and/or carbon filters!
DANGER OF FIRE!
There is a risk of fire if the instructions for cleaning or
Ÿ
replacing grease filters and/or carbon filters are not
followed.
Grease deposits in the metal grease filters can cause a
Ÿ
fire. Never flambé on a cooking zone with the extractor
switched on. The high flames can cause a fire. Always use
the appliance with the metal grease filter. Clean the grease
filter regularly.
Overheated fat or oil can start a fire. Always supervise the
Ÿ
heating of fat and oil. Never extinguish a fire with water;
always use a fire blanket, lid or plate.
2. SAFETY INSTRUCTIONS
2.1 lnstallation
WARNING!
This appliance should only be connected by a
registered installer.
If the safety instructions and warnings are not
followed, the manufacturer cannot be held
responsible for any resulting damage.
Ÿ
This appliance should only be connected by
a registered installer.
Ÿ
Prior to installation, ensure that the local
distribution conditions (voltage, frequency,
nature of the gas and gas pressure) and the
adjustment of the appliance are compatible.
Ÿ
The voltage, frequency, power, type of gas
and the country for which the appliance has
been designed are shown on the appliance
rating plate.
Ÿ
Check the appliance for transport damage.
Do not connect a damaged appliance.
Ÿ
The walls and the worktop surrounding the
appliance must be heat resistant up to at
least 105 °C.
Ÿ
The worktop into which the hob is fitted
should be flat.
Ÿ
Extraction hoods and other appliances that
extract cooking vapours can affect the safe
operation of appliances that burn gas or
other fuel (including those in other rooms) by
backflowing combustion gases. These gases
can potentially lead to carbon monoxide
poisoning. After installing an extraction hood
or other vapour extractor, the operation of
appliances with flue gas extraction must be
tested by a competent person to ensure that
the combustion gases do not flow back.
2.2 Electrical connection
ELECTRIC SHOCK!
This appliance must be earthed.
Ÿ
The electrical connection must comply with
national and local regulations.
Ÿ
For class I appliances, check that your
home's electrical system provides proper
earthing.
Ÿ
The wall plug socket and plug should always
be accessible.
Ÿ
If a stationary appliance is not fitted with a
supply cord and a plug, or with other means
for disconnection from the supply mains
having a contact separation in all poles that
provide full disconnection under overvoltage
EN
33
Publicidad
