Refsta TOLOMEO Manual De Uso página 46

time.
Ÿ
Countdown starts automatically.
Ÿ
The extractor unit switches off after the time
that has been set.
9.6 Saturation of the
grease filter
After 100 operating hours, the grease filter
symbol is illuminated; it is necessary to perform
maintenance of the grease filter (see
'Maintenance/Cleaning the filters'). The grease
filter saturation indication is always enabled.
9.7 Saturation of the odour
filter
After 200 operating hours, a flashing 'C' will
appear in the extractor unit display; it is
necessary to perform maintenance of the odour
10. USER MENU
The user menu enables the user to set the
signals on the hob as desired. This concerns
both audio (tone and volume) and visual
signals.
1. Touch the on/off key twice within three
seconds.
Ÿ
The pause key is blinking.
2. Touch and hold the pause key.
3. Then, touch each cooking zone key
clockwise (start with the cooking zone key
on the front left).
46 EN
filter.
By default the odour filter saturation indication
is deactivated (when the extraction is operating
in ducted mode). Activate the odour filter
saturation indication if the extraction unit is
installed as a recirculation application.
Activation of the odour filter saturation
indication
1. Touch the extraction key.
2. Again, touch and hold the extraction key for
5 seconds.
Ÿ
The odour filter signal 'C' lights up intensely
for 1 second.
Ÿ
Now the symbol 'C' appears when it is
necessary to perform maintenance of the
odour filter.
Deactivation of the odour filter saturation
indication
1. Touch the extraction key.
2. Again, touch and hold the extraction key for 5
seconds.
Ÿ
The odour filter symbol 'C' blinks twices.
9.8 Reset the memory of
the filter saturation
indication
Reset the memory after replacing the grease
filter and/or the odour filter.
1. Switch on the hob.
2. Touch and hold the Key 'Automatic
extraction mode' for 5 seconds.
Ÿ
The grease filter symbol or the odour filter
symbol will go off, and the memory starts
counting over again.
2x