Errebi DAKAR UP Manual De Instrucciones página 10

manual_dakar_up_v01.indd 10
1.- PRESENTATION AND GENERAL ASPECTS
1.1 GENERALITIES
1.2 TRANSPORT AND PACKING
1.3 IDENTIFICATION LABEL
2. - CHARACTERISTICS OF THE MACHINE
2.1 KEY FAMILIES
2.2 ACCESSORIES
2.3 TOOLBOX (OPTIONAL)
2.4 ELECTRICAL CIRCUIT
2.5 TECHNICAL DATA
2.6 MAIN ELEMENTS OF THE MACHINE
2.7 COMPONENTS AND FUNCTIONAL PARTS
2.7.1 CHANGE OF THE CUTTER AND TRACER (19)
2.7.2 BLOCKAGE OF CARRIAGE AT THE END OF ITS RUN "Y" AXIS
2.7.3 JAW(6)
2.7.4 TRACER SPRING-LOAD (11)
2.7.5 SPRING LOADING AND BLOCKING OF THE CARRIAGE ON AXIS "X" (5 AND 4)
2.7.6 MAINS SWITCH AND MOTOR SWITCH (15 AND 16)
2.7.7 SCREEN-KEYBOARD (1)
2.7.8 VERTICAL REGULATION OF THE TRACER (14)
3.- ENCRYPTION
3.1 ENCRYPTION PROCESS
3.2 ENCRYPTION OF KEYS WITH STANDARD JAW
3.2.1 SE1L KEY
3.2.2 HF42P15 AND YM22P15 KEYS
3.2.3 HF40P18 AND HF38P17
3.2.4 JIS4P KEY
3.2.5 TB1P5 KEY
3.2.6 MD13R KEY
3.2.7 TS14 AND TS12 KEYS
3.3 ENCRYPTION OF KEYS WITH OPTIONAL TUBULAR JAW
3.3.1 TUBULAR KEYS
3.3.2 FC6 AND RC-3 KEYS
3.3.3 TK23, TK24, -- AND TK25 KEYS
4.- MAINTENANCE
4.1 REPLACEMENT OF THE JAW CHUCK
4.2 ADJUSTMENT OF THE CHUCKS
4.2.1 NORMAL ADJUSTMENT
4.2.2 PRECISION ADJUSTMENT
4.3 REPLACEMENT OF FUSES
4.4 TENSING AND REPLACEMENT OF THE BELT
4.5 REPLACEMENT OF THE MOTOR
4.6 REPLACEMENT OF THE SCREEN-KEYBOARD
4.7 REPLACEMENT OF THE ELECTRONIC CONTROL BOARD
5.- SAFETY
6.- ELIMINATION OF RESIDUES
6.1 PACKING
6.5 SWARF
6.3 MACHINE
7.- ADAPTOR-INCLINATION-TRACER-CUTTER-KEY TABLE
8.- EXPLODED DIAGRAM
20/05/13 12:25