Publicidad
Idiomas disponibles
Idiomas disponibles
Securing Child
1. To lengthen the shoulder harness belts, press the harness
adjustment button while pulling out the shoulder harnesses to
loosen.
19
2. Unlock the buckle of the harnesses by pressing the red button.
3. Place the buckle tongues against the magnetic area on the outer
side of the enhanced child restraint so that the tongues are held in
place.
21
Use Infant Insert
We recommend using the full infant insert while the baby is under
60cm and can be used until they outgrow the infant insert. The
4. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
5. Engage the buckle. Please refer to
6. Pull down the adjustment webbing and adjust it to the proper length
to make sure your child is properly secured.
!
Always keep child secured in harness and properly tightened by
removing any slack.
!
Make sure the space between the child and the shoulder harness
straps is about the thickness of one hand.
!
When the seat is rotated in place and properly engaged, rotation
button will show green; otherwise it will show red.
!
Always make sure the seat is in locked position (rearward facing /
forward facing) even when the child is not in it.
22
infant insert increases side impact protection.
22
23
24
Using in the forward facing mode
(Child height 76cm-105cm/Child weight
18kg/15 months - 4 years old)
20
see images
!
Install the enhanced child restraint on the rear vehicle seat,
and then place the child in the enhanced child restraint.
Press the rotation button to rotate for easier side loading/unloading of
the child, then rotate the seat to the forward facing position.
!
Press the rotation button on either side to rotate the enhanced child
restraint.
Securing Child
1. To lengthen the shoulder harness belts, press the harness
adjustment button while pulling out the shoulder harnesses to
loosen.
27
2. Unlock the buckle of the harnesses by pressing the red button.
!
Remove the infant insert when in forward facing mode.
3. Place the buckle tongues against the magnetic area on the outer
side of the enhanced child restraint so that the tongues are held in
place.
4. Place the child into the enhanced child restraint and pass both arms
through the harnesses.
5. Engage the buckle.
6. Pull down the adjustment webbing and adjust it to the proper length
to make sure your child is properly secured.
7. Press the swivel lock off button
forward facing mode.
!
When the seat is rotated in place and properly engaged, rotation
button will show green, otherwise it will show red.
!
Always make sure the seat is in locked position (rearward facing /
forward facing) even when the child is not in it.
-
25
32
-1
while you rotate the seat to the
31
-2
31
&
25
26
28
29
30
31
23
Publicidad
