Configuring The System Settings (Advanced Setup Menu); Advanced Setup Menu Items; Restoring The Default Settings (Init); Updating The Firmware (Update) - Yamaha R-N301 Manual De Instrucciones

Configuring the system settings (ADVANCED SETUP menu)

Configure the system settings of the unit while viewing the front display.
1
Turn off the unit.
2
While holding down RETURN on the front
panel, press A (power).
A (power)
STANDBY/ON
DISPLAY FM MODE MEMORY
BASS
PHONES SPEAKERS
A B
3
Rotate SELECT/ENTER to select an item.
4
Press SELECT/ENTER to select a setting.
5
Press A (power) to set the unit to turn off and
turn it on again.
The new settings take effect.

ADVANCED SETUP menu items

Item
INIT
Restores the default settings.
UPDATE
Updates the firmware.
Checks the version of firmware
VERSION
currently installed on the unit.

Restoring the default settings (INIT)

INIT••••••CANCEL
Restores the default settings for the unit.
Choices
ALL
Restores the default settings for the unit.
CANCEL
Does not perform an initialization.
RETURN
FM/AM PRESET TUNING
VOLUME
SELECT
TREBLE INPUT PUSH - ENTER
RETURN
SELECT/ENTER
Function Page
35
35
35

Updating the firmware (UPDATE)

UPDATE•••NETWORK
New firmware that provides additional features or product
improvements will be released as needed. If the unit is
connected to the Internet, you can download the firmware
via the network. For details, refer to the information
supplied with updates.
■ Firmware update procedure
Do not perform this procedure unless firmware update is
necessary. Also, make sure you read the information
supplied with updates before updating the firmware.
1
When the "NETWORK" displayed on the front
display, press RETURN to start firmware
update.
y
If the unit detects newer firmware over the network,
"NewFwAvailable" appears as the "Information" menu item in
"Network Setup". In this case, you can also update the unit's
firmware by following the procedure in "Updating the unit's
firmware via the network" (p.36).
Checking the firmware version
(VERSION)
VERSION••••xx.xx
Check the version of firmware currently installed on the
unit.
y
• You can also check the firmware version in "Update" (p.34) in
the "Setup" menu.
• It may take a while until the firmware version is displayed.
35
En