Publicidad
Idiomas disponibles
Idiomas disponibles
SLEEP function
This function is useful for the night as it gradually reduces operation of the appliance.
To set this function correctly:
● Select the cool or heat mode as described above.
● Press the
button.
The appliance operates in the previously selected mode.
When you choose the sleep function, the screen will reduce the brightness and the fan speed is low.
The SLEEP function maintains the room at optimum temperature without excessive fluctuations in
either temperature or humidity with silent operation. Fan speed is always at Low, while room tempera-
ture and humidity vary gradually to ensure the most comfortable.
When in COOL mode, the selected temperature will increase by 1℃ (1℉ ) per hour in a 2 hour period.
This new temperature will be maintained for the next 6 hours. Then the appliance turn it off.
SLEEP function can be canceled at any time during operation by pressing the "Sleep", "Mode" or"fan
speed" button.
In DRY and SMART mode, SLEEP function is still available.
SETTING THE TIMER
-This timer can be used to delay the appliance startup or shutdown, this avoids wasting electricity by
optimising operating periods.
* Programming start-up
● Turn on the appliance, choose the mode you want, for example Dehumidify mode, high fan speed.
Turn off the appliance.
● Press the "
from 0.5-24 hours.
● In 5 seconds without the operation, the timer start function, then the "Timer" symbol lights.
● Press the "
* Programming shut down
● When the appliance is running, press the "
℃
" ∨ "o adjust the set time from 0.5-24 hours.
● In 5 seconds without the operation, the timer start function, then the " Timer" symbol lights.
● Press the "
Switch the unit of temperature
When the appliance is running, press the
138
" button , the screen starts to flash, press the "∧"or "∨" to adjust the set time
" button button again to cancel the Timer, and the "Timer" symbol disappear.
" button again to cancel the Timer, and the " Timer " symbol disappear.
℃ ℃
℃
" button, the screen starts to flash,press the " ∧ " /
button, then you can change the unit of temperature.
℃
℃
℃
Publicidad
